1, YTS-type hand brush filter installation is simple, just follow the arrow on the device barrel attached to indicate the direction of the pipeline. 
 2, the design should also consider the outfall in the lower part of the debris to facilitate the smooth discharge. 
 3, the nearest access outfall drains, and sewage should be kept smooth. 
 4, in order to facilitate the observation filter condition gauge should be installed in the import and export. 
 5, the sewage should be appropriate to open the drain valve, then turn the handle, clean dirt. 
 6, the sewage, the sewage should be based on the situation, turn the handle of the filter to clean up. 





 YTS-type hand-brush type filter, pig bone structure and stainless steel components coming from the brush. The parts through the filter cover, brush-type device installed in the stainless steel mesh inside the filter cover exterior handle for a simple filter on the brush from the micro-particles in addition to discharge through the outfall, the flow is not interrupted during brushing. Do not have to stop and remove the filter cleaning filter, high-quality carbon steel cylinder shell. 

 YTS-type hand brush filter technical parameters: 

 Working pressure: ≤ 1.6 MPa 
 Operating temperature: ≤ 150 ℃ 
 Filter size: 8 ~ 25 mesh / in 
 Resistance loss: ≤ 1.5KPa 

 YTS-type hand-brush characteristics of the filter: 



 Effect was: YTS hand brush filter structure is reasonable, can effectively filter dirt and quickly discharged. 
 Operation is simple: just turn the handle to open the manual valve to discharge sewage only a few seconds time, the workload is small, low labor intensity. 
 Reliable: mechanical shaft seal, turn the handle and flexible, and easy to overcome the traditional packing seal leakage shortcomings.